, Kaunas university of technology

• Mechanics Vol. 27 No. 5 (2021) - MECHANICS OF FLUIDS AND GASES
  Failure Studies on Adhesive Bonded and Bolted Joints of Natural Fiber Composites
  Abstract  PDF
• Mechanics Vol. 28 No. 5 (2022) - DYNAMICS OF MECHANICAL SYSTEMS
  Investigation of Soft Impacts in Elements of Pipe Robots
  Abstract  PDF
• Mechanics Vol. 28 No. 1 (2022) - DYNAMICS OF MECHANICAL SYSTEMS
  Analysis on Conveying of Miniature and Microparts on a Platform Subjected to Sinusoidal Displacement Cycles with Controlled Dry Friction
  Abstract  PDF
• Mechanics Vol. 28 No. 2 (2022) - MECHANICAL TECHNOLOGIES
  Quality Research of Metal Parts Produced by Cold Sheet Forming
  Abstract  PDF
• Mechanics Vol. 28 No. 1 (2022) - DYNAMICS OF MECHANICAL SYSTEMS
  Modeling of the Missile Launch Dynamic Processes in Short-Range Air Defense System
  Abstract  PDF
• Mechanics Vol. 28 No. 2 (2022) - MECHANICAL TECHNOLOGIES
  Evaluation and Modelling of Production Processes Affected by Unmeasured Situations: Case Study of a Metal Processing Company
  Abstract  PDF
• Mechanics Vol. 28 No. 5 (2022) - DYNAMICS OF MECHANICAL SYSTEMS
  Investigation of Dynamics of a Pipe Robot with Nonlinear Interactions of Its Elements
  Abstract  PDF
• Mechanics Vol. 29 No. 3 (2023) - MECHANICS OF SOLID BODIES
  Influence of Temperature Variance on the Mechanical Properties of a Welded Bearing Support Flange Under Transient Conditions Using Finite Element Approach
  Abstract  PDF
• Mechanics Vol. 29 No. 1 (2023) - MECHANICAL TECHNOLOGIES
  Investigation of the single point heating tool for the robotised incremen-tal polymer sheet forming process
  Abstract  PDF
• Mechanics Vol. 28 No. 6 (2022) - MECHANICS OF FLUIDS AND GASES
  The Effect of Mixing Recirculated Flue Gas with Primary or Secondary Air during Biomass Combustion in Grate-Firing Boiler as the Primary Measure for NOx Reduction
  Abstract  PDF
• Mechanics Vol. 29 No. 1 (2023) - DYNAMICS OF MECHANICAL SYSTEMS
  Actuation Performance of Macro Fibre Composite (MFC) as Actuator in Vibration Reduction of Cantilever Beams
  Abstract  PDF
• Mechanics Vol. 28 No. 5 (2022) - DYNAMICS FLUIDS AND GASES
  Numerical Modelling of Moisture Transport Between Two Enclosures Connected by a Tube
  Abstract  PDF
• Mechanics Vol. 28 No. 6 (2022) - MECHANICS OF FLUIDS AND GASES
  Experimental Investigation of Thermal and Humidity Dynamics in the Enclosures Made of Non-Permeable Walls
  Abstract  PDF
• Mechanics Vol. 29 No. 2 (2023) - DYNAMICS OF MECHANICAL SYSTEMS
  Research on a Single-Chamber Pneumatic Vibroactuator
  Abstract  PDF
• Mechanics Vol. 29 No. 2 (2023) - MECHANICS OF SOLID BODIES
  A Study Case of Short Dental Implants Loading in the All-On-4® System on Fixed Dental Prostheses: A Finite Element Analysis
  Abstract  PDF
• Mechanics Vol. 29 No. 5 (2023) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  Transfemoral Prostheses: Importance of Proper Fitting and Materials for Socket 3D-Printing
  Abstract  PDF
• Mechanics Vol. 17 No. 1 (2011) - MECHANICS OF SOLID BODIES
  AGING IVESTIGATION OF METALS OF THE PIPES IN LITHUANIAN POWER STATION
  Abstract  PDF
• Mechanics Vol. 17 No. 1 (2011) - MECHANICS OF SOLID BODIES
  MODEL OF RADIAL DEFORMATIONS OF PROTECTOR OF VEHICLE TIRE
  Abstract  PDF
• Mechanics Vol. 17 No. 1 (2011) - MECHANICS OF SOLID BODIES
  POSSIBILITIES OF ANALYTICAL ESTIMATION OF CLAY SLOPE STABILITY
  Abstract  PDF
• Mechanics Vol. 17 No. 1 (2011) - DYNAMICS OF MECHANICAL SYSTEMS
  MODELING AND DIAGNOSTICS OF THE GEAR POWER TRANSMISSIONS
  Abstract  PDF
• Mechanics Vol. 17 No. 2 (2011) - MECHANICS OF SOLID BODIES
  Poisson's ratios influence on strength and stiffness of cylindrical bars
  Abstract  PDF
• Mechanics Vol. 17 No. 2 (2011) - MECHANICS OF SOLID BODIES
  Investigation of multilayered packages resistance to free fall on the solid surface
  Abstract  PDF
• Mechanics Vol. 17 No. 2 (2011) - MECHANICS OF FLUIDS AND GASES
  Heat transfer for film condensation of vapour
  Abstract  PDF
• Mechanics Vol. 17 No. 2 (2011) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  Hybrid numerical-experimental investigation of two-degree-of-freedom piezoelectric positioning actuator
  Abstract  PDF
• Mechanics Vol. 17 No. 2 (2011) - MECHANICAL TECHNOLOGIES
  Wear resistant layers obtained by using materials powder for overlay welding structural steel
  Abstract  PDF
• Mechanics Vol. 17 No. 3 (2011) - MECHANICS OF SOLID BODIES
  INVESTIGATION OF DEPENDENCES OF METAL SHEET VARIABLE BLANK HOLDING FORCE
  Abstract  PDF
• Mechanics Vol. 17 No. 3 (2011) - MECHANICS OF SOLID BODIES
  MECHANICS AND MATERIAL ASPECTS IN SERVICEABILITY PREDICTION OF THE HEAT EXCHANGERS
  Abstract  PDF
• Mechanics Vol. 17 No. 3 (2011) - MECHANICS OF SOLID BODIES
  MONITORING AND IDENTIFICATION OF STRUCTURAL DAMAGES
  Abstract  PDF
• Mechanics Vol. 17 No. 3 (2011) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  TEMPERATURE FIELDS, EXCHANGES AND DEFORMATIONS OF A PRECISE LENGTH COMPARATOR MICROSCOPE
  Abstract  PDF
• Mechanics Vol. 17 No. 3 (2011) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  INVESTIGATION OF INTERACTION BETWEEN ACOUSTIC FIELD AND NONHOMOGENEOUS BUILDING STRUCTURES
  Abstract  PDF
• Mechanics Vol. 17 No. 3 (2011) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  SIMULATION OF PRODUCTS CLASSIFICATION SYSTEM FOR MANUFACTURING COST FORECASTING
  Abstract  PDF
• Mechanics Vol. 17 No. 3 (2011) - MECHANICAL TECHNOLOGIES
  MICROSTRUCTURE FORMATION ON THE BASIS OF COMPUTER GENERATED HOLOGRAM
  Abstract  PDF
• Mechanics Vol. 17 No. 4 (2011) - MECHANICS OF SOLID BODIES
  DETERMINATION OF STRESS STRAIN STATE IN PIPE SUBJECTED TO INTERNAL PRESSURE AT PLANE STRAIN CONDITION UNDER ELASTO PLASTIC LOADING
  Abstract  PDF
• Mechanics Vol. 17 No. 4 (2011) - MECHANICS OF SOLID BODIES
  FRACTURE OF LAMINATED RECTANGULAR BAR AFTER BUCKLING
  Abstract  PDF
• Mechanics Vol. 17 No. 4 (2011) - DYNAMICS OF MECHANICAL SYSTEMS
  EXPERIMENTAL INVESTIGATION OF VIBRATIONAL DRILLING
  Abstract  PDF
• Mechanics Vol. 17 No. 4 (2011) - DYNAMICS OF MECHANICAL SYSTEMS
  INVESTIGATION OF THE STEADY STATE OPERATION CONDITIONS OF ROTATIONAL VIBROACTUATORS
  Abstract  PDF
• Mechanics Vol. 17 No. 4 (2011) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  ANALYSIS OF CYLINDRICAL PIEZOELECTRIC ACTUATOR USED IN FLOW CONTROL DEVICE
  Abstract  PDF
• Mechanics Vol. 17 No. 4 (2011) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  INERTIAL LOAD STABILIZATION IN FREE LOAD EXERCISE MACHINES
  Abstract  PDF
• Mechanics Vol. 17 No. 5 (2011) - MECHANICS OF SOLID BODIES
  PROGNOSIS OF THE AGING OF THE PIPE ELBOW IN THE LITHUANIAN POWER STATION
  Abstract  PDF
• Mechanics Vol. 17 No. 5 (2011) - DYNAMICS OF MECHANICAL SYSTEMS
  EXPERIMENTAL RESEARCH OF VIBRATORY SLIPPING OF THE SHAFT FASTENED WITH TIGHTNESS IN THE BUSHING
  Abstract  PDF
• Mechanics Vol. 17 No. 5 (2011) - DYNAMICS OF MECHANICAL SYSTEMS
  APPLICATIONS OF TORSIONAL VIBRATIONS FOR VIBRO-DRILING OPERATIONS
  Abstract  PDF
• Mechanics Vol. 17 No. 5 (2011) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  ROTARY HEAT PUMP
  Abstract  PDF
• Mechanics Vol. 17 No. 5 (2011) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  MATHEMATICAL MODEL OF THE OPERATION OF A WEIGHT BATCHER FOR DRY PRODUCTS
  Abstract  PDF
• Mechanics Vol. 17 No. 5 (2011) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  AGENT-BASED METHODOLOGY FOR DEVELOPING MECHATRONIC SYSTEMS SOFTWARE
  Abstract  PDF
• Mechanics Vol. 17 No. 6 (2011) - MECHANICS OF SOLID BODIES
  STUDIES ON DEFORMATION CHARACTERISTICS OF ALBUMEN BELKOZIN MEMBRANES USING HYSTERESIS LOOPS TECHNIQUE
  Abstract  PDF
• Mechanics Vol. 17 No. 6 (2011) - DYNAMICS OF MECHANICAL SYSTEMS
  EXPERIMENTAL INVESTIGATION OF VIBRATORY ASSEMBLY WITH PASSIVE COMPLIANCE
  Abstract  PDF
• Mechanics Vol. 17 No. 6 (2011) - DYNAMICS OF MECHANICAL SYSTEMS
  RESEARCH OF THE MINE IMITATOR INTERACTION WITH DEFORMABLE SOIL AND ITS PRACTICAL REALIZATION
  Abstract  PDF
• Mechanics Vol. 17 No. 6 (2011) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  INVESTIGATION OF GEOMETRICAL AND PHYSICAL – MECHANICAL PARAMETERS OF BRAILLE BY ASSESSING THE DIFFERENT TYPES OF CARDBOARD MATERIALS
  Abstract  PDF
• Mechanics Vol. 17 No. 6 (2011) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  LOW CHARGE TRANSPORT REFRIGERATOR (I). REFRIGERANT CHARGE AND STRATEGIES OF CHARGE REDUCTION
  Abstract  PDF
• Mechanics Vol. 17 No. 6 (2011) - MECHANICAL TECHNOLOGIES
  EXPERIMENTAL AND STATISTICAL INVESTIGATION OF THERMO-MECHANICAL FRICTION DRILLING PROCESS
  Abstract  PDF
• Mechanics Vol. 17 No. 6 (2011) - MECHANICAL TECHNOLOGIES
  THE EROSION PRODUCT CATCHER TESTING IN THE FLOW OF COMBUSTION PRODUCTS WITH THE USE OF THE THERMOPHORESIS EFFECT
  Abstract  PDF
• Mechanics Vol. 17 No. 6 (2011) - MECHANICAL TECHNOLOGIES
  INFLUENCE OF THE TEMPERIG TEMPERATURE AND LASER BEAM ON HARDNESS AND WEAR OF THE OVERLAY WELDED LAYERS
  Abstract  PDF
• Mechanics Vol. 18 No. 1 (2012) - MECHANICS OF FLUIDS AND GASES
  AIR BUBBLES AND WATER DROPLETS ENTRAINMENT AND REMOVAL IN TURBULENT WATER FLOWS
  Abstract  PDF
• Mechanics Vol. 18 No. 1 (2012) - DYNAMICS OF MECHANICAL SYSTEMS
  COMPRESSIBLE FLUID-STRUCTURE INTERACTION AND MODAL REPRESENTATION
  Abstract  PDF
• Mechanics Vol. 18 No. 1 (2012) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  LOW CHARGE TRANSPORT REFRIGERATOR (II). THEORETICAL AND EXPERIMENTAL INVESTIGATION
  Abstract  PDF
• Mechanics Vol. 18 No. 1 (2012) - Information for authors
  Information for authors
  Abstract  PDF
• Mechanics Vol. 18 No. 2 (2012) - MECHANICS OF SOLID BODIES
  NONDESTRUCTIVE TESTING OF ULTRA-HIGH PERFORMANCE CONCRETE TO EVALUATE FREEZE-THAW RESISTANCE
  Abstract  PDF
• Mechanics Vol. 18 No. 2 (2012) - MECHANICS OF SOLID BODIES
  THE RESEARCH OF PHYSICAL – MECHANICAL CHARACTERISTICS OF ECOLOGICAL THERMAL INSULATION
  Abstract  PDF
• Mechanics Vol. 18 No. 2 (2012) - MECHANICS OF SOLID BODIES
  ANALYTICAL MODEL FOR THE INVESTIGATION OF RC SLAB BEHAVIOUR UNDER IMPACT LOAD
  Abstract  PDF
• Mechanics Vol. 18 No. 2 (2012) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  SECURITY METHOD OF EMBEDDED SOFTWARE FOR MECHATRONIC SYSTEMS
  Abstract  PDF
• Mechanics Vol. 18 No. 2 (2012) - MECHANICS OF FLUIDS AND GASES
  THERMAL STATE AND HYDRODYNAMICS OF EVAPORATING LIQUID HYDROCARBON DROPLETS. 1. A POSSIBILITY OF NATURAL CIRCULATION OF THE LIQUID IN THE DROPLET
  Abstract  PDF
• Mechanics Vol. 18 No. 2 (2012) - MECHANICS OF SOLID BODIES
  CIRCUMFERENTIAL STRESS CONCENTRATION FACTORS AT THE ASYMMETRIC SHALLOW NOTCHES OF THE LIFTING HOOKS OF TRAPEZOIDAL CROSS-SECTION
  Abstract  PDF
• Mechanics Vol. 18 No. 2 (2012) - MECHANICS OF SOLID BODIES
  MODELLING AND SIMULATION OF STRENGTH AND DAMPING OF THE SUPPORT PILLAR WELDED BY LONGITUDINAL WELD
  Abstract  PDF
• Mechanics Vol. 18 No. 3 (2012) - MECHANICAL TECHNOLOGIES
  THE DEVELOPMENT OF THE INTELLIGENT FORECASTING MODEL FOR PRODUCTIVITY INDEX IN MANUFACTURING
  Abstract  PDF
• Mechanics Vol. 18 No. 3 (2012) - MECHANICS OF SOLID BODIES
  RESIDUAL STRESS IN A THIN-FILM MICROOPTOELECTROMECHANICAL (MOEMS) MEMBRANE
  Abstract  PDF
• Mechanics Vol. 18 No. 3 (2012) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  MATHEMATICAL SIMULATION OF OPERATION OF THE WEIGHING TYPE FILLING MACHINE FOR DRY PRODUCTS
  Abstract  PDF
• Mechanics Vol. 18 No. 3 (2012) - MECHANICS OF FLUIDS AND GASES
  INFLUENCE OF SURROUNDING SPACE ON HEAT TRANSFER EFFECTIVENESS OF REFRIGERATOR’S CONDENSER
  Abstract  PDF
• Mechanics Vol. 18 No. 3 (2012) - MECHANICS OF FLUIDS AND GASES
  THE THERMAL STATE AND HYDRODYNAMICS OF EVAPORATING HYDROCARBON DROPLETS. 2. ENERGY INTERPRETATION OF SPRAYED N-DECANE EVAPORATION PROCESS
  Abstract  PDF
• Mechanics Vol. 18 No. 3 (2012) - MECHANICS OF SOLID BODIES
  EVALUATION OF CYCLIC INSTABILITY BY MECHANICAL CHARACTERISTICS FOR STRUCTURAL MATERIALS
  Abstract  PDF
• Mechanics Vol. 18 No. 3 (2012) - CHRONICLE
  Chronicle
  Abstract  PDF
• Mechanics Vol. 18 No. 3 (2012) - Information for authors
  Information for authors
  Abstract  PDF
• Mechanics Vol. 18 No. 4 (2012) - DYNAMICS OF MECHANICAL SYSTEMS
  MODELLING OF ROTOR DYNAMICS CAUSED BY OF DEGRADING BEARINGS
  Abstract  PDF
• Mechanics Vol. 18 No. 4 (2012) - MECHANICS OF FLUIDS AND GASES
  HEAT TRANSFER BETWEEN THE NON-STANDARD TUBE BUNDLE AND STATICALLY STABLE FOAM FLOW
  Abstract  PDF
• Mechanics Vol. 18 No. 4 (2012) - DYNAMICS OF MECHANICAL SYSTEMS
  ANALYSIS OF BUILDING’S CONSTRUCTION DEFECTS BY USING TIME-FREQUENCY ANALYSIS
  Abstract  PDF
• Mechanics Vol. 18 No. 4 (2012) - MECHANICS OF SOLID BODIES
  STRESS CONCENTRATION AT THE SHALLOW NOTCHES OF THE CURVED BEAMS OF CIRCULAR CROSS-SECTION
  Abstract  PDF
• Mechanics Vol. 18 No. 4 (2012) - MECHANICAL TECHNOLOGIES
  NON-INVASIE MICRO-OPTO-ELECTRO-MECHANICAL SYSTEM ADAPTATION TO RADIAL BLOOD FLOW PULSE AND VELOCITY ANALYSIS
  Abstract  PDF
• Mechanics Vol. 18 No. 4 (2012) - MECHANICS OF SOLID BODIES
  INVESTIGATION OF THE EXPERIMENTAL CAR BODY IN STATIC BENDING AND TORSION
  Abstract  PDF
• Mechanics Vol. 18 No. 5 (2012) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  CYLINDRICAL PIEZOELECTRIC MOBILE ACTUATOR BASED ON TRAVELLING WAVE
  Abstract  PDF
• Mechanics Vol. 18 No. 5 (2012) - MECHANICAL TECHNOLOGIES
  DEVELOPMENT OF DECISION SUPPORT SYSTEM FOR FUSED DEPOSITION MODELLING MANUFACTURING COST ESTIMATION
  Abstract  PDF
• Mechanics Vol. 18 No. 5 (2012) - DYNAMICS OF MECHANICAL SYSTEMS
  MULTILAYERED POLYMERIC FILM VIBRATIONS UNDER UN-SYMMETRICAL LOADING
  Abstract  PDF
• Mechanics Vol. 18 No. 5 (2012) - Information for authors
  Information for authors
  Abstract  PDF
• Mechanics Vol. 18 No. 6 (2012) - MECHANICAL TECHNOLOGIES
  A THEORETICAL STUDY OF MILITARY FUEL COMBUSTION RATE IN DIESEL ENGINES UNDER HIGH–ALTITUDE CONDITIONS
  Abstract  PDF
• Mechanics Vol. 18 No. 6 (2012) - MECHANICAL TECHNOLOGIES
  APPLICATION OF WAVELET TRANSFORM TO DEFECT DETECTION OF BUILDING’S STRUCTURE
  Abstract  PDF
• Mechanics Vol. 18 No. 6 (2012) - MECHANICS OF SOLID BODIES
  ON THE STRENGTH PROBLEM IN CHAIN ELEMENTS OVERLOADED DURING MAINTENANCE OF BIO-FUEL CONVEYOR
  Abstract  PDF
• Mechanics Vol. 19 No. 4 (2013) - MECHANICS OF SOLID BODIES
  PRESSURE VESSEL WITH CORRUGATED CORE NUMERICAL AND EXPERIMENTAL ANALYSIS
  Abstract  PDF
• Mechanics Vol. 19 No. 1 (2013) - MECHANICS OF SOLID BODIES
  THE ELASTOPLASTIC CONCRETE STRAIN INFLUENCE ON THE CRACKING MOMENT AND DEFORMATION OF RECTANGULAR REINFORCED CONCRETE ELEMENTS
  Abstract  PDF
• Mechanics Vol. 19 No. 1 (2013) - MECHANICAL TECHNOLOGIES
  FORECASTING MODEL OF MANUFACTURING TIME AT THE EARLY DESIGN STAGE OF PRODUCT AND PROCESS
  Abstract  PDF
• Mechanics Vol. 19 No. 1 (2013) - DYNAMICS OF MECHANICAL SYSTEMS
  SIMULATION OF VIBRATORY ALIGNMENT OF THE PARTS TO BE ASSEMBLED UNDER PASSIVE COMPLIANCE
  Abstract  PDF
• Mechanics Vol. 19 No. 1 (2013) - DYNAMICS OF MECHANICAL SYSTEMS
  HUMAN BODY RHEOLOGY IMPACT ON MEASUREMENTS IN ACCELEROMETER APPLICATIONS
  Abstract  PDF
• Mechanics Vol. 19 No. 1 (2013) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  VACUUMED FOOD PACKAGES GROUPING EQUIPMENT CYCLOGRAM INVESTIGATION
  Abstract  PDF
• Mechanics Vol. 19 No. 1 (2013) - MECHANICS OF SOLID BODIES
  A PRELIMINARY APPROACH TO THE LOAD AND STRESS ANALYSIS OF THE ARC-SHAPED CORRUGATED STEEL STRUCTURE
  Abstract  PDF
• Mechanics Vol. 19 No. 1 (2013) - MECHANICS OF FLUIDS AND GASES
  COMBINED HEAT PUMP AND POWER PLANT. PART I: THERMODYNAMIC ANALYSIS
  Abstract  PDF
• Mechanics Vol. 19 No. 1 (2013) - Information for authors
  Information for authors
  Abstract  PDF
• Mechanics Vol. 19 No. 2 (2013) - MECHANICAL TECHNOLOGIES
  INVESTIGATION OF HARDENING AND TEMPERING DEFORMATIONS OF CARBURIZED LOW ALLOY STEEL
  Abstract  PDF
• Mechanics Vol. 19 No. 2 (2013) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  TRAINING FACILITY LOADING CONTROL BY MRF DAMPER
  Abstract  PDF
• Mechanics Vol. 19 No. 2 (2013) - MECHANICS OF FLUIDS AND GASES
  INITIAL WATER TEMPERATURE INFLUENCE ON THE THERMAL STATE EVAPORATING DROPLETS
  Abstract  PDF
• Mechanics Vol. 19 No. 2 (2013) - MECHANICAL TECHNOLOGIES
  INFLUENCE OF STAINLESS STEEL CIRCULAR PIPES WELDING METHODS AND PARAMETERS TO THE PROCESS ACCURACY AND PRODUCTIVITY
  Abstract  PDF
• Mechanics Vol. 19 No. 2 (2013) - DYNAMICS OF MECHANICAL SYSTEMS
  ALIGNMENT OF THE PARTS USING HIGH FREQUENCY VIBRATIONS
  Abstract  PDF
• Mechanics Vol. 19 No. 2 (2013) - MECHANICS OF FLUIDS AND GASES
  COMBINED HEAT PUMP AND POWER PLANT. PART I: THERMODYNAMIC ANALYSIS
  Abstract  PDF
• Mechanics Vol. 19 No. 2 (2013) - DYNAMICS OF MECHANICAL SYSTEMS
  RESEARCH INTO ELEMENTS OF THE MULTIFUNCTIONAL DEFORMATION ZONES OF A CAR BODY
  Abstract  PDF
• Mechanics Vol. 19 No. 2 (2013) - Information for authors
  100 th Anniversary Issue of the scientific journal “Mechanika”
  Abstract  PDF
• Mechanics Vol. 19 No. 2 (2013) - Information for authors
  Prof. Dr. Habil. Jonas Sapragonas (1942 – 2013)
  Abstract  PDF
• Mechanics Vol. 19 No. 3 (2013) - DYNAMICS OF MECHANICAL SYSTEMS
  INFLUENCE OF BOUNDARY CONDITIONS ON THE VIBRATION MODES OF SMART TURNING TOOL
  Abstract  PDF
• Mechanics Vol. 19 No. 3 (2013) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  RESEARCH OF AERODYNAMICS CHARACTERISTICS OF WIND POWER PLANT BLADES
  Abstract  PDF
• Mechanics Vol. 19 No. 4 (2013) - DYNAMICS OF MECHANICAL SYSTEMS
  SEGMENTATION OF PIEZOELECTRIC LAYERS BASED ON THE NUMERICAL STUDY OF NORMAL STRAIN DISTRIBUTIONS IN BIMORPH CANTILEVERS VIBRATING IN THE SECOND TRANSVERSE MODE
  Abstract  PDF
• Mechanics Vol. 20 No. 3 (2014) - MECHANICAL TECHNOLOGIES
  Research of Ni-Al-O system catalytic coatings developed for gasification and steam reforming processes
  Abstract  PDF
• Mechanics Vol. 19 No. 3 (2013) - DYNAMICS OF MECHANICAL SYSTEMS
  COUPLING OF ZONES WITH DIFFERENT RESOLUTION CAPABILITIES IN DYNAMIC FINITE ELEMENT MODELS OF WOVEM COMPOSITES
  Abstract  PDF
• Mechanics Vol. 19 No. 3 (2013) - MECHANICAL TECHNOLOGIES
  THE PRINCIPLE OF HEAT CONVERSION INTO MECHANICAL WORK
  Abstract  PDF
• Mechanics Vol. 19 No. 3 (2013) - CHRONICLE
  Chronicle
  Abstract  PDF
• Mechanics Vol. 19 No. 3 (2013) - Information for authors
  Information for authors
  Abstract  PDF
• Mechanics Vol. 19 No. 4 (2013) - MECHANICS OF FLUIDS AND GASES
  THE RESEARCH OF SUPPLIED AIR FLOW PARAMETERS IN AIR HEATED BUILDINGS
  Abstract  PDF
• Mechanics Vol. 19 No. 4 (2013) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  APPLICATIONS OF VIRTUAL REALITY TECHNOLOGIES IN DESIGN AND DEVELOPMENT OF ENGINEERING PRODUCTS AND PROCESES
  Abstract  PDF
• Mechanics Vol. 20 No. 1 (2014) - MECHANICAL TECHNOLOGIES
  Impact of human factors and errors for product quality and reliability in the integrated approach of product and process design, maintenance and production
  Abstract  PDF
• Mechanics Vol. 19 No. 5 (2013) - MECHANICAL TECHNOLOGIES
  SEX DIFFERENCES IN LOWER EXTREMITY LANDING KINEMATICS THROUGH NEUROMUSCULAR FATIGUE
  Abstract  PDF
• Mechanics Vol. 19 No. 5 (2013) - MECHANICS OF FLUIDS AND GASES
  ANALYSIS OF SOLID PHASE NITROGEN CONVERSION PROCESS TO GASEOUS OXIDES
  Abstract  PDF
• Mechanics Vol. 19 No. 5 (2013) - Information for authors
  Information for authors
  Abstract  PDF
• Mechanics Vol. 19 No. 6 (2013) - MECHANICAL TECHNOLOGIES
  The study on implementation of agile manufacturing system in Lithuanian industry
  Abstract  PDF
• Mechanics Vol. 19 No. 6 (2013) - MECHANICS OF SOLID BODIES
  The deformation problem of a circular elastic flexible plate under variable load
  Abstract  PDF
• Mechanics Vol. 19 No. 6 (2013) - DYNAMICS OF MECHANICAL SYSTEMS
  Elastic vibrations of the peg during part alignment
  Abstract  PDF
• Mechanics Vol. 19 No. 6 (2013) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  The ring type piezoelectric actuator generating elliptical movement
  Abstract  PDF
• Mechanics Vol. 20 No. 1 (2014) - Information for authors
  Information for authors
  Abstract  PDF
• Mechanics Vol. 20 No. 3 (2014) - DYNAMICS OF MECHANICAL SYSTEMS
  New deep groove ball bearings high frequencies vibration testing
  Abstract  PDF
• Mechanics Vol. 20 No. 3 (2014) - MECHANICS OF FLUIDS AND GASES
  Peculiarities of the Leidenfrost effect application for drag force reduction
  Abstract  PDF
• Mechanics Vol. 20 No. 2 (2014) - MECHANICS OF SOLID BODIES
  Determination of mixed-mode fracture characteristics due dynamic opening and in-plane shear cases
  Abstract  PDF
• Mechanics Vol. 20 No. 2 (2014) - MECHANICAL TECHNOLOGIES
  Integrated structure of manufacturing data for computer aided manufacturing engineering
  Abstract  PDF
• Mechanics Vol. 20 No. 2 (2014) - MECHANICS OF SOLID BODIES
  The extent of irregular stress distribution in a two-layer cylindrical bars subjected to the change of temperature
  Abstract  PDF
• Mechanics Vol. 20 No. 2 (2014) - DYNAMICS OF MECHANICAL SYSTEMS
  Modified tool structures for effective cutting
  Abstract  PDF
• Mechanics Vol. 20 No. 2 (2014) - DYNAMICS OF MECHANICAL SYSTEMS
  Experimental research of vibratory alignment using passive compliance devices
  Abstract  PDF
• Mechanics Vol. 20 No. 2 (2014) - MECHANICAL TECHNOLOGIES
  Non-destructive test methods application for structure analysis of ultra-high performance concrete after deterioration of cyclic salt-scaling
  Abstract  PDF
• Mechanics Vol. 20 No. 4 (2014) - MECHANICAL TECHNOLOGIES
  The research of single point incremental forming process for composite mould production
  Abstract  PDF
• Mechanics Vol. 20 No. 3 (2014) - MECHANICS OF SOLID BODIES
  Investigation of solid rocket motor strength characteristics by employing composite materials
  Abstract  PDF
• Mechanics Vol. 20 No. 5 (2014) - MECHANICS OF FLUIDS AND GASES
  Numerical simulation of foam flow through RBMK-1500 control rod channel
  Abstract  PDF
• Mechanics Vol. 20 No. 3 (2014) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  Optimization of fixation elements parameters for ring type piezoelectric actuator generating elliptical movement
  Abstract  PDF
• Mechanics Vol. 20 No. 3 (2014) - Information for authors
  Information for authors
  Abstract  PDF
• Mechanics Vol. 20 No. 5 (2014) - MECHANICAL TECHNOLOGIES
  Simulation of dosage process of viscous products
  Abstract  PDF
• Mechanics Vol. 20 No. 4 (2014) - CHRONICLE
  Chronicle
  Abstract  PDF
• Mechanics Vol. 21 No. 2 (2015) - MECHANICS OF FLUIDS AND GASES
  Modeling of heat and mass transfer processes in phase transformation cycle of sprayed water into gas: 2. Peculiarities of a droplet cycle that is heating by convection
  Abstract  PDF
• Mechanics Vol. 20 No. 5 (2014) - Information for authors
  Information for authors
  Abstract  PDF
• Mechanics Vol. 20 No. 6 (2014) - MECHANICAL TECHNOLOGIES
  Experimental analysis and numerical simulation of the stainless AISI 304 steel friction drilling process
  Abstract  PDF
• Mechanics Vol. 20 No. 6 (2014) - MECHANICS OF FLUIDS AND GASES
  Modeling of heat and mass transfer processes in phase transformation cycle of sprayed water into gas: 1. The calculation peculiarities of droplet phase transformation parameters
  Abstract  PDF ()
• Mechanics Vol. 20 No. 6 (2014) - MECHANICAL TECHNOLOGIES
  Vibrational excitation of a work piece for drilling force reduction in brittle materials
  Abstract  PDF
• Mechanics Vol. 20 No. 6 (2014) - DYNAMICS OF MECHANICAL SYSTEMS
  Research of rotary piezotable driven by two harmonic signals
  Abstract  PDF
• Mechanics Vol. 20 No. 6 (2014) - MECHANICAL TECHNOLOGIES
  Investigation of abrasive water jet cutting parameters influence on 6082 aluminium alloy surface roughness
  Abstract  PDF
• Mechanics Vol. 20 No. 6 (2014) - MECHANICS OF SOLID BODIES
  The fiber volume fraction influence on mechanical properties of multi-layered carbon tubes
  Abstract  PDF
• Mechanics Vol. 21 No. 1 (2015) - MECHANICS OF SOLID BODIES
  The strength investigation of the composite material with implanted sensors
  Abstract  PDF
• Mechanics Vol. 26 No. 6 (2020) - DYNAMICS OF MECHANICAL SYSTEMS
  Motion of vibration manipulators with self stopping device in one direction with interactions of two non deformable elements in one direction
  Abstract  PDF
• Mechanics Vol. 21 No. 4 (2015) - MECHANICS OF SOLID BODIES
  Empirical calculation method of residual flexural tensile strength fR,1 of SFRC
  Abstract  PDF
• Mechanics Vol. 81 No. 1 (2010) - DYNAMICS OF MECHANICAL SYSTEMS
  Simulation of the part-to-part vibratory alignment under impact mode displacement
  Abstract  PDF
• Mechanics Vol. 81 No. 1 (2010) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  Structural optimization in product design process
  Abstract  PDF
• Mechanics Vol. 81 No. 1 (2010) - DYNAMICS FLUIDS AND GASES
  Development of cavitation applications for the remediation of contaminated water
  Abstract  PDF
• Mechanics Vol. 81 No. 1 (2010) - DYNAMICS OF MECHANICAL SYSTEMS
  Analysis of some extreme situations in exploitation of complex rotary systems
  Abstract  PDF
• Mechanics Vol. 81 No. 1 (2010) - DYNAMICS FLUIDS AND GASES
  Effect of liquid physical properties variability on film thickness
  Abstract  PDF
• Mechanics Vol. 81 No. 1 (2010) - DYNAMICS OF MECHANICAL SYSTEMS
  Diagnostics practice of heavy duty high speed gear transmissions
  Abstract  PDF
• Mechanics Vol. 21 No. 4 (2015) - MECHANICAL TECHNOLOGIES
  Comparative analysis of microstructure and quality of gas metal arc welded and shielded metal arc welded joints
  Abstract  PDF
• Mechanics Vol. 21 No. 1 (2015) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  Numerical and experimental analysis of membrane with piezoelectric element used for synthetic jet flow control
  Abstract  PDF
• Mechanics Vol. 21 No. 1 (2015) - DYNAMICS OF MECHANICAL SYSTEMS
  Investigation of noise barriers enhancement efficiency for attenuation of low frequency traffic noise
  Abstract  PDF
• Mechanics Vol. 21 No. 4 (2015) - MECHANICAL TECHNOLOGIES
  Investigation of ultrasonic stepping motors and nanomanipulator for scanning probe microscopy
  Abstract  PDF
• Mechanics Vol. 21 No. 3 (2015) - DYNAMICS OF MECHANICAL SYSTEMS
  Novel training machine for stimulation of blood circulation in feet
  Abstract  PDF
• Mechanics Vol. 21 No. 5 (2015) - DYNAMICS OF MECHANICAL SYSTEMS
  Dynamics of the large opening fire valves of dust explosions automatic localization systems
  Abstract  PDF
• Mechanics Vol. 69 No. 1 (2008) - Articles
  Impact of laser and other high technologies on manufacturing efficiency in Lithuanian and Finnish sheet metalworking industry
  Abstract  PDF
• Mechanics Vol. 69 No. 1 (2008) - Articles
  Statistical evaluation of low cycle durability for alloyed structural steels weld metals at room and elevated temperature
  Abstract  PDF
• Mechanics Vol. 69 No. 1 (2008) - Articles
  Applications of high frequency vibrations for surface milling
  Abstract  PDF
• Mechanics Vol. 69 No. 1 (2008) - Articles
  Research of complex rotary systems vibrocondition based on analysis of dynamical processes and spectrum of vibrations
  Abstract  PDF
• Mechanics Vol. 69 No. 1 (2008) - Articles
  Deformation characteristic research of albumen belkozin membrane
  Abstract  PDF
• Mechanics Vol. 21 No. 3 (2015) - MECHANICAL TECHNOLOGIES
  The definition of cutting forces in square shoulder milling by 3D
  Abstract  PDF
• Mechanics Vol. 21 No. 4 (2015) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  Structural and functional characteristics of the lifting mechanism in universal rocket transportation launching device
  Abstract  PDF
• Mechanics Vol. 22 No. 5 (2016) - MECHANICAL TECHNOLOGIES
  Analysis of 50 m Backstroke Class S4 Disabled Swimmers Race Parameters
  Abstract  PDF
• Mechanics Vol. 51 No. 1 (2005) - Articles
  Influence of multilayer beams cross-section shape on stiffness under bending
  Abstract  PDF
• Mechanics Vol. 51 No. 1 (2005) - Articles
  Integrated product and process development using rapid prototyping and rapid tooling technologies
  Abstract  PDF
• Mechanics Vol. 51 No. 1 (2005) - Articles
  Strength anisotropy of railway wheels under contact load
  Abstract  PDF
• Mechanics Vol. 51 No. 1 (2005) - Articles
  The strain state of mechanically heterogeneous welded joint with the real square weld subjected to tension at plane deformation
  Abstract  PDF
• Mechanics Vol. 51 No. 1 (2005) - Articles
  Optimization of linear precise movements
  Abstract  PDF
• Mechanics Vol. 51 No. 1 (2005) - Articles
  Dynamic synthesis of the recoil imitation system of weapons
  Abstract  PDF
• Mechanics Vol. 52 No. 2 (2005) - Articles
  Orientation of parts on stencil oscillating in horizontal plane
  Abstract  PDF
• Mechanics Vol. 52 No. 2 (2005) - Articles
  Determination of lifetime for railway carriages automatic coupler SA – 3
  Abstract  PDF
• Mechanics Vol. 52 No. 2 (2005) - Articles
  Investigation of micromechanical gas sensor response
  Abstract  PDF
• Mechanics Vol. 52 No. 2 (2005) - Articles
  Interacting heat transfer processes in water droplets
  Abstract  PDF
• Mechanics Vol. 53 No. 3 (2005) - Articles
  Stresses and strains determination of welded pipelines with the mild interlayer at plane stress state under elastic-plastic loading
  Abstract  PDF
• Mechanics Vol. 53 No. 3 (2005) - Articles
  Influence of surface hardening on low cycle tension compression and bending characteristics
  Abstract  PDF
• Mechanics Vol. 53 No. 3 (2005) - Articles
  Investigation of calibration facilities of precision line scales
  Abstract  PDF
• Mechanics Vol. 53 No. 3 (2005) - Articles
  The comparative analysis of 2D and 3D microstructural models stresses of porous polymer materials
  Abstract  PDF
• Mechanics Vol. 21 No. 6 (2015) - MECHANICAL TECHNOLOGIES
  Practical aspects of increasing workers efficient work time in a high noise level industrial area
  Abstract  PDF
• Mechanics Vol. 23 No. 2 (2017) - MECHANICAL TECHNOLOGIES
  Friction between steel plates under the influence of magnetic field
  Abstract  PDF
• Mechanics Vol. 23 No. 1 (2017) - MECHANICS OF FLUIDS AND GASES
  Experimental investigation of transport refrigerator with eutectic plate evaporator and economizer with intermediate heat exchanger
  Abstract  PDF
• Mechanics Vol. 23 No. 2 (2017) - MECHANICS OF SOLID BODIES
  Investigation of the probabilistic low cycle fatigue design curves at stress cycling
  Abstract  PDF
• Mechanics Vol. 22 No. 1 (2016) - Information for authors
  Information about article authors
  Abstract  PDF
• Mechanics Vol. 54 No. 4 (2005) - Articles
  Laws of deformation processes and fracture of plastic steel from the point of view of dynamic overloading
  Abstract  PDF
• Mechanics Vol. 56 No. 6 (2005) - Articles
  Wear of Gadfield steel-base sintered composite at current collection sliding
  Abstract  PDF
• Mechanics Vol. 23 No. 2 (2017) - DYNAMICS OF MECHANICAL SYSTEMS
  Diagnostics of Cycloidal Gear Speed Reducers in Vertical MultiRotor Sysem
  Abstract  PDF
• Mechanics Vol. 22 No. 5 (2016) - MECHANICAL TECHNOLOGIES
  The sedimentation of magneto-rheological fluid monitoring system based on resistivity measuring
  Abstract  PDF
• Mechanics Vol. 22 No. 3 (2016) - MECHANICAL TECHNOLOGIES
  Statistical research on forming of threaded holes in thin plates
  Abstract  PDF
• Mechanics Vol. 76 No. 2 (2009) - Articles
  Investigation of adequacy of the acoustical field model
  Abstract  PDF
• Mechanics Vol. 78 No. 4 (2009) - Articles
  About cutting forces for skiving by a movable two-blade block
  Abstract  PDF
• Mechanics Vol. 22 No. 5 (2016) - MECHANICS OF SOLID BODIES
  Investigation on low cycle fatigue of aluminium alloy welded joints
  Abstract  PDF
• Mechanics Vol. 22 No. 5 (2016) - MECHANICAL TECHNOLOGIES
  Investigation of fracture of carbon steel springs used for furniture application
  Abstract  PDF
• Mechanics Vol. 23 No. 5 (2017) - MECHANICAL TECHNOLOGIES
  Numerical analysis of microresonator developed on the basis of PZT nanocomposite
  Abstract  PDF
• Mechanics Vol. 22 No. 5 (2016) - DYNAMICS OF MECHANICAL SYSTEMS
  Research of hand tremor vibrations and interference with external me-chanical oscillations source
  Abstract  PDF
• Mechanics Vol. 23 No. 5 (2017) - MECHANICS OF FLUIDS AND GASES
  Numerical Analysis of Thermal and Hydro Dynamical Processes in Lower Fuel Channel Part of Boiling Water Reactor
  Abstract  PDF
• Mechanics Vol. 22 No. 6 (2016) - DYNAMICS OF MECHANICAL SYSTEMS
  Vibrational and numerical evaluation of Human Incus properties
  Abstract  PDF
• Mechanics Vol. 23 No. 6 (2017) - MECHANICS OF SOLID BODIES
  Investigation of the ankle foot orthoses footplates stiffness
  Abstract  PDF
• Mechanics Vol. 22 No. 6 (2016) - MECHANICS OF SOLID BODIES
  Effects of the strain transmission from the main board to the installed electronic components
  Abstract  PDF
• Mechanics Vol. 23 No. 2 (2017) - MECHANICS OF SOLID BODIES
  Experimental and numerical analysis of flexural concrete-UHPFRC/RC composite members
  Abstract  PDF
• Mechanics Vol. 23 No. 3 (2017) - DYNAMICS OF MECHANICAL SYSTEMS
  High frequency separation of suspended micro/nanoparticles
  Abstract  PDF
• Mechanics Vol. 24 No. 1 (2018) - DYNAMICS OF MECHANICAL SYSTEMS
  MODELING AND RESEARCH OF BUS EQUIPPED WITH DYNAMIC STABILITY CONTROL SYSTEM
  Abstract  PDF
• Mechanics Vol. 23 No. 3 (2017) - MECHANICS OF SOLID BODIES
  Finite element investigation osteoporotic lumbar L1 vertebra buckling in a presence of torsional load
  Abstract  PDF
• Mechanics Vol. 24 No. 1 (2018) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  Design and Analysis of Viscometric Sensor with Embedded Microstruc-ture for Biomedical Applications
  Abstract  PDF
• Mechanics Vol. 28 No. 3 (2022) - DYNAMICS OF MECHANICAL SYSTEMS
  Vibration Energy Harvester (VEH) for a Free Body Moving in Space at Vibro Shock Mode
  Abstract  PDF
• Mechanics Vol. 24 No. 1 (2018) - MECHANICS OF FLUIDS AND GASES
  Numerical analysis of thermal and hydro dynamical processes in upper fuel channel part of boiling water reactor
  Abstract  PDF
• Mechanics Vol. 23 No. 6 (2017) - MECHANICAL TECHNOLOGIES
  Modelling of Halbach Array Based Targeting Part of a Magnetic Drug Delivery Device
  Abstract  PDF
• Mechanics Vol. 27 No. 6 (2021) - MECHANICS OF SOLID BODIES
  Material Parameters Identification for Modelling of Carbon Rod Structures Delamination
  Abstract  PDF
• Mechanics Vol. 24 No. 2 (2018) - MECHANICS OF SOLID BODIES
  The Analysis of Dissimilar Metal Weld Joints
  Abstract  PDF
• Mechanics Vol. 24 No. 4 (2018) - DYNAMICS OF MECHANICAL SYSTEMS
  Measurement of Vibrations of a Plate on Elastic Foundation
  Abstract  PDF
• Mechanics Vol. 24 No. 3 (2018) - MECHANICS OF SOLID BODIES
  Strength and Microstructure Analysis of Spot Welded Joints between a Sheet and a Nut of Different Steels
  Abstract  PDF
• Mechanics Vol. 25 No. 2 (2019) - MECHANICS OF SOLID BODIES
  Mechanical properties and microstructure of aluminium alloy AW6082-T6 joints welded by double-sided MIG process before and after aging
  Abstract  PDF
• Mechanics Vol. 25 No. 1 (2019) - MECHANICAL TECHNOLOGIES
  Monitoring of Welding Process Parameters in Gas Tungsten Arc Welding of Carbon Steel Weldments
  Abstract  PDF
• Mechanics Vol. 25 No. 4 (2019) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  Investigation of performance gains on a sailplane with morphing wing trailing edge
  Abstract  PDF
• Mechanics Vol. 25 No. 3 (2019) - MECHANICS OF SOLID BODIES
  Coefficient of Moment of Inertia for Ribbed RC Slab Beams
  Abstract  PDF
• Mechanics Vol. 25 No. 2 (2019) - MECHANICAL TECHNOLOGIES
  Investigation of Mechanical Properties of Hemp and Flax Fibers Hybrid Composites for Biomedical Applications
  Abstract  PDF
• Mechanics Vol. 25 No. 5 (2019) - DYNAMICS OF MECHANICAL SYSTEMS
  Manipulation of small parts being assembled on a horizontally vibrating plate
  Abstract  PDF
• Mechanics Vol. 25 No. 3 (2019) - DYNAMICS OF MECHANICAL SYSTEMS
  Experimental study of multi-magnet excitation for enhancing micro-power generation in piezoelectric vibration energy harvester
  Abstract  PDF
• Mechanics Vol. 26 No. 2 (2020) - MECHANICS OF SOLID BODIES
  Rod End Stress Analysis for Hydraulic Cylinder of Live Floor Conveying System
  Abstract  PDF
• Mechanics Vol. 25 No. 6 (2019) - DYNAMICS OF MECHANICAL SYSTEMS
  Numerical and Experimental Investigation of Sonotrode for Formation of Piezocomposite Functional Elements
  Abstract  PDF
• Mechanics Vol. 26 No. 4 (2020) - DYNAMICS OF MECHANICAL SYSTEMS
  Shape Optimization of the Active Element for Vibration Energy Harvesting
  Abstract  PDF
• Mechanics Vol. 26 No. 4 (2020) - MECHANICS OF SOLID BODIES
  Stiffness and Strength Analysis of Flexural RC beams strengthened with CFRP Sheets Considering the Influence of Pre-cracking
  Abstract  PDF
• Mechanics Vol. 26 No. 6 (2020) - MECHANICS OF FLUIDS AND GASES
  Investigation of fluid flow velocity within the intervertebral disc
  Abstract  PDF
• Mechanics Vol. 27 No. 4 (2021) - MECHANICAL TECHNOLOGIES
  Standards for Transition from 2D Drawing to Model Based Definition in Mechanical Engineering
  Abstract  PDF
• Mechanics Vol. 27 No. 2 (2021) - MECHANICS OF SOLID BODIES
  Interlaminar Strength Analysis of Bonded Carbon Fiber Rods
  Abstract  PDF
• Mechanics Vol. 27 No. 1 (2021) - MECHANICS OF SOLID BODIES
  Influence of Imperfections on Behaviour of Thin-walled Steel-concrete Composite Columns
  Abstract  PDF
• Mechanics Vol. 27 No. 6 (2021) - MECHANICS OF SOLID BODIES
  Application of Finite Element Sub-modeling Techniques in Structural Mechanics
  Abstract  PDF
• Mechanics Vol. 27 No. 4 (2021) - MECHANICS OF FLUIDS AND GASES
  The Subcooling Effect of the Flue Gas Flow Mixture Internal Dynamic and Heating Capacity
  Abstract  PDF
• Mechanics Vol. 27 No. 2 (2021) - DYNAMICS OF MECHANICAL SYSTEMS
  Pilot Study of Wobble Seat on Trunk Muscles Activity and Kinematics
  Abstract  PDF
• Mechanics Vol. 27 No. 1 (2021) - DYNAMICS OF MECHANICAL SYSTEMS
  Experimental Investigation of an Influence of Coupled Compressive Loading on Porcine Spine Specimens
  Abstract  PDF
• Mechanics Vol. 27 No. 5 (2021) - DYNAMICS OF MECHANICAL SYSTEMS
  Mechanical Systems of Precise Robots with Vibrodrives, in which the Direction of the Exciting Force Coincides with the Line of Relative Motion of the System
  Abstract  PDF
• Mechanics Vol. 27 No. 2 (2021) - DYNAMICS OF MECHANICAL SYSTEMS
  Inertial Piezoelectric Rotary Motor Based on Low Profile Stator with Trapezoidal Waveguides
  Abstract  PDF
• Mechanics Vol. 29 No. 2 (2023) - DYNAMICS OF MECHANICAL SYSTEMS
  Aerodynamic and External Ballistic modelling of a Rocket Target with Two Motors in a Parallel Configuration
  Abstract  PDF
• Mechanics Vol. 68 No. 6 (2007) - Articles
  Stress distribution in multilayer structural element subjected to skew bending
  Abstract  PDF
• Mechanics Vol. 68 No. 6 (2007) - Articles
  Effect of environment temperature on fatigue properties of laminated leather
  Abstract  PDF
• Mechanics Vol. 68 No. 6 (2007) - Articles
  Analysis the interaction of two cylindrical surfaces under shock impact load
  Abstract  PDF
• Mechanics Vol. 17 No. 1 (2011) - DYNAMICS OF MECHANICAL SYSTEMS
  STROBOHOLOGRAPHY FOR THE ANALYSIS OF VIBRATION MODES OF MECHANICAL SYSTEMS
  Abstract  PDF
• Mechanics Vol. 17 No. 3 (2011) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  FREE VERTICAL OSCILLATIONS IN ROWING
  Abstract  PDF
• Mechanics Vol. 18 No. 2 (2012) - MECHANICAL TECHNOLOGIES
  STRUCTURAL INTEGRITY VERIFICATION OF POLYCARBONATE TYPE PERSONAL IDENTITY DO-CUMENTS
  Abstract  PDF
• Mechanics Vol. 19 No. 3 (2013) - MECHANICS OF SOLID BODIES
  INFLUENCE OF CANTILEVER LENGTH ON STRESS DISTRIBUTION IN FIXATION SCREWS OF ALL-ON-4 FULL-ARCH BRIDGE
  Abstract  PDF
• Mechanics Vol. 19 No. 6 (2013) - MECHANICAL TECHNOLOGIES
  Authenticity analysis of personal identity documents by the methods of holographic interferometry
  Abstract  PDF
• Mechanics Vol. 20 No. 3 (2014) - MECHANICAL TECHNOLOGIES
  Authenticity analysis of personal identity documents by the methods of holographic interferometry. Part II
  Abstract  PDF
• Mechanics Vol. 20 No. 5 (2014) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  Research of the force characteristics of hydraulic cylinder type loading devices for exercise machines
  Abstract  PDF
• Mechanics Vol. 21 No. 3 (2015) - MECHANICAL TECHNOLOGIES
  Development of electromagnetic damper
  Abstract  PDF
• Mechanics Vol. 21 No. 4 (2015) - DYNAMICS OF MECHANICAL SYSTEMS
  Vibration assisted spring loaded micro spray system for biomedical application
  Abstract  PDF
• Mechanics Vol. 21 No. 5 (2015) - MECHANICS OF SOLID BODIES
  Influence of nitriding temperature on surface structural characteristics and fatigue strength of steel
  Abstract  PDF
• Mechanics Vol. 69 No. 1 (2008) - Articles
  Investigation of tension of flock printing materials
  Abstract  PDF
• Mechanics Vol. 22 No. 3 (2016) - DYNAMICS OF MECHANICAL SYSTEMS
  Balancing of turbomachine rotors by increasing the eccentricity identification accuracy
  Abstract  PDF
• Mechanics Vol. 23 No. 4 (2017) - MECHANICAL TECHNOLOGIES
  The Relationship between Different Age Swimmers’ Flip Turn Tem-poral and Kinematic Characteristics
  Abstract  PDF
• Mechanics Vol. 24 No. 3 (2018) - MECHANICS OF FLUIDS AND GASES
  Investigation of Water Aeration Based on Digital Image Processing
  Abstract  PDF
• Mechanics Vol. 24 No. 5 (2018) - MECHANICAL TECHNOLOGIES
  Control features of 3D deflector under different braking conditions
  Abstract  PDF
• Mechanics Vol. 24 No. 2 (2018) - DYNAMICS OF MECHANICAL SYSTEMS
  Investigation of Small Motions of Liquid in Cylindrical Chamber of Auto-Balancing Device
  Abstract  PDF
• Mechanics Vol. 25 No. 4 (2019) - MECHANICAL TECHNOLOGIES
  Influence of Structure and Physical-Mechanical Characteristics of Threads on the Strength of Binding the Books
  Abstract  PDF
• Mechanics Vol. 25 No. 6 (2019) - MECHANICS OF FLUIDS AND GASES
  Experimental Investigation of Water Droplet Heating in Humidified Air Flow
  Abstract  PDF
• Mechanics Vol. 26 No. 1 (2020) - DYNAMICS OF MECHANICAL SYSTEMS
  Investigation of vibroactivity of the mechanical equipment aiming to reduce emitting noise
  Abstract  PDF
• Mechanics Vol. 27 No. 1 (2021) - MECHANICAL TECHNOLOGIES
  Plasma Electrolyte Polishing of Titanium and Niobium Alloys in Low Concentrated Salt Solution Based Electrolyte
  Abstract  PDF
• Mechanics Vol. 17 No. 6 (2011) - DESIGN AND OPTIMIZATION OF MECHANICAL SYSTEMS
  RESEARCH OF SOLIDITY AND RELIABILITY OF MASS CUSTOMIZED PRODUCTS IN COMPETITIVE MANUFACTURING SYSTEM
  Abstract  PDF
• Mechanics Vol. 18 No. 6 (2012) - MECHANICAL TECHNOLOGIES
  THE EFFECT OF PHYSIOTHERAPY ON THE SYMMETRY OF PASSIVE MECHANICAL PROPERTIES OF MUSCLES OF CHILDREN WITH AND WITHOUT CEREBRAL PALSY
  Abstract  PDF
• Mechanics Vol. 20 No. 2 (2014) - MECHANICAL TECHNOLOGIES
  Simulation of concentration distribution of dispersed particles of magnetorheological fluid in the gap workpiece-tool of finishing polishing device
  Abstract  PDF
• Mechanics Vol. 20 No. 5 (2014) - MECHANICAL TECHNOLOGIES
  Investigation of energy harvesting from high frequency cutting tool vibrations
  Abstract  PDF
• Mechanics Vol. 21 No. 1 (2015) - DYNAMICS OF MECHANICAL SYSTEMS
  Impact of the tribological characteristics on the dynamics of the ultrasonic piezoelectric motor
  Abstract  PDF
• Mechanics Vol. 25 No. 1 (2019) - MECHANICAL TECHNOLOGIES
  Research of durability of Braille formed in paper
  Abstract  PDF
• Mechanics Vol. 27 No. 1 (2021) - DYNAMICS OF MECHANICAL SYSTEMS
  Passive Balancing of the Rotor with an Auto-Balancing Device with a Viscous Incompressible Liquid
  Abstract  PDF
• Mechanics Vol. 19 No. 6 (2013) - MECHANICAL TECHNOLOGIES
  Research of influencing factors on the change of geometric parameters of Braille elements on self-adhesive labels
  Abstract  PDF
• Mechanics Vol. 24 No. 4 (2018) - MECHANICS OF SOLID BODIES
  Study of Acoustic Emission Signals During Crack Propagation in Multiscale Nano-Composites
  Abstract  PDF
• Mechanics Vol. 26 No. 2 (2020) - DYNAMICS OF MECHANICAL SYSTEMS
  Influence of Shear Flexibility in Structural Shear Walls on Pushover Analysis
  Abstract  PDF
• Mechanics Vol. 26 No. 4 (2020) - MECHANICAL TECHNOLOGIES
  Influence of Primers on the Optical Characteristics of Ink-Jet Imprints
  Abstract  PDF
• Mechanics Vol. 20 No. 5 (2014) - MECHANICS OF SOLID BODIES
  Investigation of elasticity of magnetosensitive adaptive materials for laminated composite structures
  Abstract  PDF