FE ANALYSIS OF 6063 ALUMINIUM PROFILES WITH COMPLEX CROSS-SECTION DURING ONLINE QUENCHING PROCESSES

Authors

  • R. B. Mei Northeastern University
  • L. Bao Northeastern University
  • C. S. Li Northeastern University
  • J. K. Wang Northeastern University
  • X. H. Liu Northeastern University

DOI:

https://doi.org/10.5755/j01.mech.21.2.11733

Keywords:

Aluminium profile, online quenching, finite element, temperature, displacement, external stretching force.

Abstract

Thermal-elastic-plastic finite element (FE) theory and solution of thermal-structural coupled field were investigated on the basis of commercial software ANSYS. The FE model used to solve the transient air and water cooling processes of extrusion profiles was built through developed programs on the basis of ANSYS. The calculated temperature and displacement of a plate during water cooling are in good agreement with the measured value and the FE model is reliable. Consequently, the temperature, displacement and equivalent stress of a complex cross-section profile from a plant during online quenching process were investigated. Thickness and boundary conditions difference leads to the temperature difference across the section increases up to about 120C firstly and then decrease to less than 40C. For the complex cross-section profile, the non-uniform deformation is more obviously and the larger thermal stress is the main reason of plastic deformation, fracture generation and occurrence of higher residual stress. A method used external stretching force to improve the distortion was also proposed in quenching processes and the displacement and equivalent stress is reduced sig-nificantly through external stretching force. However, larger external stretching force perhaps results in more serious distortion and fracture.

DOI: http://dx.doi.org/10.5755/j01.mech.21.2.11733

Downloads

Published

2015-04-16

Issue

Section

MECHANICS OF SOLID BODIES