Mechanical properties and microstructure of aluminium alloy AW6082-T6 joints welded by double-sided MIG process before and after aging

Authors

  • Saulius BASKUTIS Kaunas University of Technology
  • Audrius ŽUNDA Aleksandras Stulginskis University
  • Raimondas KREIVAITIS Aleksandras Stulginskis University

DOI:

https://doi.org/10.5755/j01.mech.25.2.22008

Keywords:

double-sided welding, aluminium alloy, microhardness, microstructure, aging

Abstract

This study focuses on welding of AW6082-T6 aluminium alloy and investigation of the microhardness and microstructure properties in the heat affected and fusion zones using pulsed inert gas arc welding. The effect of welding current on microstructure and solidification variables of the double-sided welds has been studied. The microhardness analysis of the welded joints has been carried out to evaluate the effect of microstructural variations of the weld seam zones. A comparison research on the microhardness and microstructure of opposite sides of the weld after natural aging is presented. The results indicate that the influence of natural long-term aging on the microhardness of the weld seam zones is evident.

DOI: http://dx.doi.org/10.5755/j01.mech.25.2.22008

Author Biographies

Saulius BASKUTIS, Kaunas University of Technology

Department of Production Engineering

Audrius ŽUNDA, Aleksandras Stulginskis University

Institute of power and transport machinery engineering

Raimondas KREIVAITIS, Aleksandras Stulginskis University

Institute of power and transport machinery engineering

Downloads

Published

2019-05-02

Issue

Section

MECHANICS OF SOLID BODIES