ON THE STRENGTH PROBLEM IN CHAIN ELEMENTS OVERLOADED DURING MAINTENANCE OF BIO-FUEL CONVEYOR

Authors

  • A. Žiliukas Kaunas University of Technology
  • S. Diliūnas Kaunas University of Technology
  • A. Jutas Kaunas University of Technology
  • S. V. Augutis Kaunas University of Technology
  • R. Ramanauskas Kaunas University of Technology

DOI:

https://doi.org/10.5755/j01.mech.18.6.3171

Keywords:

Strength, chain conveyor, bio-fuel

Abstract

Small deviations in maintenance conditions of chains influence on various cases of deformations that usually are not mentioned in the chain maintenance guide. In the case of small distortion of chain axis the chain is loaded by transversal load and chain elements incur a bending moment. These additional loads increase stress value on area of chain axle and it comes close to the value of ultimate stress. In this article the original evaluation methodology of geometrical and mechanical characteristics is presented according to chain loading kinetics. Also this article covers related measurement and calculation results that were used as tools for verification of presented methodology.

DOI: http://dx.doi.org/10.5755/j01.mech.18.6.3171

Downloads

Published

2012-12-28

Issue

Vol. 18 No. 6 (2012)

Section

MECHANICS OF SOLID BODIES

License

The copyright for the articles in this journal is retained by the author(s) with the first publication right granted to the journal. The journal is licensed under the Creative Commons Attribution License 4.0 (CC BY 4.0).