Study on Mechanical Behavior and Deformation Law of Expansion Pro-cess of Expansion Screen Base Pipe

Authors

  • Pu LIU Sichuan University of Science & Engineering
  • Zhengqiang TANG Sichuan University of Science & Engineering
  • Ning DAI PetroChina Offshore Emergency Rescue Response Center
  • Quanlin XIAO Sichuan University of Science & Engineering
  • Zhiping WANG Sichuan University of Science & Engineering
  • Chenlong WANG CNPC Engineering Technology R&D Company Limited

DOI:

https://doi.org/10.5755/j02.mech.33414

Keywords:

Expandable Screen, the base pipe, finite element analysis, nonlinearity

Abstract

The expansion process of the base pipe of the expanded screen pipe includes large displacement elastic-plastic deformation problems such as geometric nonlinearity, material nonlinearity and contact nonlinearity. In this paper, based on the elastic-plastic deformation mechanism of the base pipe of expanded screen pipe, finite element equations are established and numerical simulation is used to construct a finite element simulation model to study the mechanical behavior and deformation law of Φ203.2 mm base pipe of the expanded screen pipe expansion process. The results show that the expansion rate has no effect on the increase of wall thickness, and the decrease is proportional to the expansion rate. The greater the expansion rate, the greater the residual stress at both ends of the slot.

Author Biographies

Pu LIU, Sichuan University of Science & Engineering

Male,1988年出生,现任四川理工学院工程师、讲师,硕士生导师,西南石油大学工学博士。主要从事油气井筒压力控制(先进流体动力学)、温度场数值模拟、环保装备开发等相关科研工作。

Zhengqiang TANG, Sichuan University of Science & Engineering

男,研究生,获得工程学士学位。2021年<>月至今在四川理工学院攻读硕士学位。主要研究方向为固体膨胀管技术。

Downloads

Published

2023-10-18

Issue

Section

MECHANICS OF SOLID BODIES