Effect of Vibration Direction on Vibration-Assisted Fixed Abrasive Polishing

Authors

  • Ruikun NIU Jinling Institute of Technology
  • Huantao WANG Jinling Institute of Technology
  • Zhongming WU Jinling Institute of Technology
  • Li SUN Jinling Institute of Technology

DOI:

https://doi.org/10.5755/j02.mech.34089

Keywords:

fixed abrasive polishing, vibration direction, vibration-assisted polishing, material removal rate, surface quality

Abstract

In order to study the effect of vibration direction on vibration-assisted fixed abrasive polishing and explore the influence rule of vibration direction on material removal rate and workpiece surface quality, a single abrasive particle vibration-assisted fixed abrasive polishing model was established to study the effect of axial and radial vibration on workpiece profile depth, surface morphology, etc. And the experiments of vibration-assisted fixed abrasive polishing in different vibration directions were carried out. The results show that axial vibration auxiliary polishing can greatly advance the processing efficiency, and improve the workpiece material removal rate by 27.6%; radial vibration auxiliary polishing can achieve better surface quality, and reduces the surface roughness by 59.8%.

Downloads

Published

2024-04-04

Issue

Vol. 30 No. 1 (2024)

Section

MECHANICAL TECHNOLOGIES

License

The copyright for the articles in this journal is retained by the author(s) with the first publication right granted to the journal. The journal is licensed under the Creative Commons Attribution License 4.0 (CC BY 4.0).