Experimental research of vibratory alignment using passive compliance devices

Abstract

The experimental analysis of interdependent vi-bratory alignment of the shaft and bushing type parts of rectangular and circular cross-section is carried out, using the passive compliance devices of different construction. An experimental setup for vibratory assembly was mounted, when the shaft is fixed in the passive compliance device and pressed by predetermined force towards the bushing, which is based on the vibratory platform and subjected to vibratory excitation along the axial direction. The alignment duration dependencies on axial misalignment, frequency and amplitude of vibrations and initial pressing force of the device were made.

DOI: http://dx.doi.org/10.5755/j01.mech.20.2.6945